Allied-telesis AlliedView-EMS 3.10 QoS MANAGER Manual de usuario Pagina 112

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 111
Property Name Description Valid Values
Source TCP
Port
Specifies the TCP source port
of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Destination
TCP Port
Specifies the TCP destination
port of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Source UDP
Port
Specifies the UDP source port
of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Destination
UDP Port
Specifies the UDP destination
port of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Source IPX
Socket
Specifies the source IPX socket
number of an IPX packet
This can be set by entering a 4-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
following:
NCP
SAP
RIP
NNB
DIAG
NLSP
IPXWAN
any
Destination
IPX Socket
Specifies the destination IPX
socket number of an IPX
packet
This can be set by entering a 4-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
following:
NCP
SAP
RIP
NNB
DIAG
NLSP
IPXWAN
any
Match1 Specifies the actual data to
match
This can be set by entering a 4-
byte hex number. (0000-FFFF)
Mask1 Specifies whether the
corresponding bit in the
Match1 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 4-
byte hex number. (0000-FFFF)
Offset1 Specifies the location or offset
w
here the pattern for Match1 is
Range: 0-62
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 112 of 128
Vista de pagina 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 127 128

Comentarios a estos manuales

Sin comentarios