Allied-telesis AT-S31 Manual de usuario descargar pdf (Pagina 39)

AT-S31 Version 1.0.1 User’s Guide

'LVSOD\LQJWKH6WDWXVRID0RGXOH

The following procedure allows you to view and change the parameter

settings for an individual module.

To display the status of a module, perform the following procedure:

1. From the Main Menu, select Module status and configuration.

The Chassis Status Menu is displayed.

2. Use the arrow keys on the keyboard to highlight a module on which

you want to view the status.

3. Press <Return>.

An example of the Module Configuration Menu is shown below.

The Module Configuration Menu items and options are described below:

Port

Lists the type of ports on the module.

Link

Indicates whether there is an active connection between a port and the

device connected to the port. Online indicates that there is a link while

Offline indicates that there is no link.

Speed

This column will specify the operating speed of the port. Possible values

are 10M, 100M, or 1000M.

Module Configuration Menu

Module 1 - AT-PB13

Module: AT-PB13

Type & Version: 01h

Power: On

Port Link Speed Mode RX/ACT

A(10BaseFL) Online 10M Full On

B(10BaseT) Online 10M Full On

Module name AT-PB13

Enable link test (MissingLink is off)

> Disable link test (MissingLink is on)

Return to Chassis Status Menu...

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Sin comentarios

Allied-telesis AT-S31 Manual de usuario Pagina 39