Allied-telesis AT-S25 Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
Section II: Local and Telnet Mangement
66
Link
The status of the link between the port and the end
node connected to the port.
Possible settings for this parameter are:
Up - indicates that a valid link exists between the port
and the end node.
Down - indicates that the port and the end node have
not established a valid link.
Speed
The operating speed of the port.
Possible settings for this parameter are:
10 Mbps = 10 MB
100 Mbps = 100 MB
1000 Mbps = 1 GB (Optional uplink ports only)
Duplex
The duplex mode of the port.
Possible settings for this parameter are:
Half-duplex
Full-duplex
PVID
The port VLAN identifier assigned to the port.
FlowCtrl
The flow control setting for the port.
Possible settings for this parameter are:
Enable
Disable
STP_State
The current operating STP status of the port.
Possible settings for this parameter are:
Disable
Blocking
Listening
Learning
Forwarding
PARAMETER DESCRIPTION
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 275 276

Comentarios a estos manuales

Sin comentarios