Allied-telesis AT-MR912TX Manual de usuario descargar pdf (Pagina 39)

AT-MR912TX Installation Manual

Cascaded Installation

You do not need to upgrade a standalone AT-MR912TX hub to enable

cascading. From the illustration below, connection is established between the

MDI Port 12 on one hub (the bottom hub in this example) and any port (1

through 12) on a second AT-MR912TX hub (Port 11 on the upper hub in the

example).

Figure 14: Cascaded Hubs

1. Make sure the package includes all of the required parts

2. Make sure you have the correct cables for the connection between cascaded

hubs as well as between the network ports on each hub and the attached

devices.

3. Remove each hub to be included in the cascaded hub conﬁguration from its

shipping package and store the box and packing materials in a safe place

in case the unit needs to be transferred in the future.

4. Arrange both AT-MR912TX hubs such that the back panel on each hub is

within 5 meters (16.4 feet) of the other.

5. Insert the female end of the power cord into the Power Receptacle on the

back of the unit.

6. Insert the male end of the power cord into the into an electrical output of

the appropriate power.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Sin comentarios

Allied-telesis AT-MR912TX Manual de usuario Pagina 39