Allied-telesis AT-GS924M Manual de usuario descargar pdf (Pagina 23)

AT-GS908M, AT-GS916M, and AT-GS924M Switches Installation Guide

LEDs

There are four types of LEDs on the AT-GS900M Series switches:

 “STATUS LEDs”

 “MODE LEDs” on page 24

 “Port LEDs” on page 25

 “SFP Slot LEDs” on page 26

STATUS LEDs STATUS LEDs display the status of the switch.

STATUS LEDs are as follows:

 “POWER LED”

 “FAULT LED” on page 24

 “STANDBY LED” on page 24

The STATUS LEDs are located on the left side of the front panel of the

switch. See Figure 3.

Figure 3. STATUS LEDs

POWER LED

The POWER LED reports the status of AC power.

Table 2 describes the states of the POWER LED.

Table 2. POWER LED Functional Description

State Description

Off Indicates either the switch is not receiving

AC power or the AC input power is operating

outside the normal range.

Steady

Green

The switch is receiving AC input power and is

operating normally.

STATUS LEDs

Reset Button

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Sin comentarios

Allied-telesis AT-GS924M Manual de usuario Pagina 23