Allied-telesis AT-DC2552XS Manual de usuario Pagina 63

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 62
Stack Installation Guide for AT-2552XS L2 Data Center Switch
63
Figure 33. Removing QSFP+ Dust Cover
7. Insert the fiber optic cable to the port on the transceiver, as shown in
Figure 34, until it clicks in place.
Figure 34. Attaching a Fiber Optic Cable to an QSFP+ Transceiver
8. Repeat this procedure if you have other QSFP+ transceivers to install.
Installing a
QSFP+ MTHTP
Cable
Perform the following procedure to install a QSFP+ MTHTP cable:
1. Remove the QSFP+ MTHTP cable from its shipping container and
store the packaging material in a safe location.
2. Remove the dust cover from the chassis QSFP+ slot. See Figure 35
on page 64.
Vista de pagina 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 83 84

Comentarios a estos manuales

Sin comentarios