Allied Telesis AT-S80 Guía de instalación descargar pdf (Pagina 32)

Chapter 2: Installation

Installing the Switch in an Equipment Rack

To install the switch in a standard 19-inch equipment rack, perform the

following procedure:

1. If attached, remove the rubber feet using a flat-head screwdriver.

2. Install a rack-mount bracket on one side of the switch using a Phillips

screwdriver and four of the rack-mount screws included with the

switch. Figure 7 and Figure 8 illustrate installing the brackets on the

AT-FS750/16 and AT-FS750/24 Switches, respectively.

Figure 7. Attaching the Rack-Mount Bracket to the AT-FS750/16 Switch

Figure 8. Attaching the Rack-Mount Bracket to the AT-FS750/24 Switch

3. Repeat step 2 to attach the remaining bracket to the other side of the

switch.

838

864

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Sin comentarios

Allied Telesis AT-S80 Guía de instalación Pagina 32