Allied Telesis AT-S94 Guía de usuario descargar pdf (Pagina 176)

Page 176

Allied Telesis

AT-S94 Management Software Web Browser Interface User’s Guide

SNMPv1,2c Notification Recipient

The SNMP v1, v2c Recipient table contains the following fields:

• Recipients IP Address — Displays the IP address to which the traps are sent.

• Notification Type — Displays the type of notification sent. The possible field values are:

– Trap — Indicates that traps are sent.

– Inform — Indicates that informs are sent.

• Community String — Displays the community string of the trap manager.

• Notification Version — Displays the trap type. The possible field values are:

– SNMPV1 — Indicates that SNMP Version 1 traps are sent.

– SNMPV2c — Indicates that SNMP Version 2 traps are sent.

• UDP Port — Displays the UDP port used to send notifications. The field range is 1-65535. The default is 162.

• Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.

• Timeout — Indicates the amount of time (in seconds) the device waits before resending informs. The field

range is 1-300. The default is 15 seconds.

• Retries — Indicates the number of times the device resends an inform request. The field range is 1-255.

The default is 3.

SNMPv3 Notification Recipient

The SNMPv3 Notification Recipient table contains the following fields:

• Recipients IP Address — Displays the IP address to which the traps are sent.

• Notification Type — Displays the type of notification sent. The possible field values are:

– Trap — Indicates that traps are sent.

– Inform — Indicates that informs are sent.

• User Name — Displays the user to which SNMP notifications are sent.

• Security Level — Displays the means by which the packet is authenticated. The possible field values are:

– No Authentication — Indicates that the packet is neither authenticated nor encrypted.

– Authentication — Indicates that the packet is authenticated.

• UDP Port — Displays the UDP port used to send notifications. The field range is 1-65535. The default is 162.

• Filter Name — Includes or excludes SNMP filters.

• Timeout — Indicates the amount of time (in seconds) the device waits before resending informs. The field

range is 1-300. The default is 15 seconds.

• Retries — Indicates the number of times the device resends an inform request. The field range is 1-

255.The default is 3.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 253 254

Sin comentarios

Allied Telesis AT-S94 Guía de usuario Pagina 176