Allied Telesis AT-FS7016 Guía de instalación Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
AT-FS7016 and AT-FS7024 Installation Guide
17
Rackmounting the Switch
The AT-FS7016 and AT-FS7024 switches can be used on a desktop or installed
in a rack. For desktop installation, refer to “Installing the Switch on a Table or
Desktop” on page 15.
To install the switch in a rack, perform the following procedure:
1. If attached, remove the four protective rubber feet from the bottom on the
unit.
For the AT-FS7016 switch, remove the protective feet from the bottom
of the unit, as shown in Figure 8.
Figure 8 Removing the Protective Feet (AT-FS7016)
For the AT-FS7024 switch, remove the protective feet from the bottom
of the unit, as shown in Figure 9.
Figure 9 Removing the Protective Feet (AT-FS7024)
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Comentarios a estos manuales

Sin comentarios