Allied Telesis AT-MC102XL Guía de instalación descargar pdf (Pagina 27)

AT-MC10x Series Media Converters Installation Guide

Planning the Installation

Be sure to observe the following guidelines when planning the installation

of your media converter.

 The end-nodes connected to the media converter must operate at

100 Mbps.

 The two end-nodes connected to the ports of the media converter

must operate with the same duplex mode, either half- or full-duplex.

The media converter itself can operate in either mode.

 The devices connected to the two ports on the media converter can

be a network adapter card, repeater, switch, or router.

 Refer to Table 4, Table 5, and Table 6 for the twisted pair and fiber

optic port specifications.

Table 4. 100Base-TX Twisted Pair Port Cabling Specifications

Table 5. 100Base-FX Fiber Optic Port Specifications (Full-duplex)

Cable Type

Maximum Operating

Distance

Shielded or unshielded Category 5 or

better

100 m (328 ft)

Model

Type of Fiber

Optic Cable

Maximum

Operating

Distance

Maximum

Allowable Loss

Budget

AT-MC101XL 50/125 or 62.5/

125 micron

multimode

2 km (1.2 mi) 13 dB at 1310 nm

AT-MC102XL 50/125 or 62.5/

125 micron

multimode

2 km (1.2 mi) 13 dB at 1310 nm

AT-MC103XL 9/125 micron

single-mode

15 km (9.3 mi) 16 dB at 1310 nm

AT-MC103LH 9/125 micron

single-mode

40 km (24.8

mi)

16 dB at 1310 nm

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

Comentarios a estos manuales

Sin comentarios

Allied Telesis AT-MC102XL Guía de instalación Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Convertidores de medios de la red Allied Telesis AT-MC102XL