Allied-telesis x510 Series Manual de usuario descargar pdf (Pagina 34)

Chapter 1: Overview

The twisted pair ports on the AT-x510-28GPX and AT-x510-52GPX

Switches have two LEDs that display link, activity and PoE information.

The LEDs are shown in Figure 7 on page 35.

Note

The duplex mode information for the ports on the AT-x510-28GPX

and AT-x510-52GPX Switches can be viewed with the management

software.

Table 6. LEDs on the 10/100/1000Base-T Ports on the AT-x510-28GTX

and AT-x510-52GTX Switches

LED State Description

Link/

Activity

LED

Solid Green A port has established a 1000 Mbps link to

a network device.

Flashing

Green

A port is transmitting or receiving data at

1000 Mbps.

Solid Amber A port has established a 10 or 100 Mbps

link to a network device.

Flashing

Amber

A port is transmitting or receiving data at 10

or 100 Mbps.

Off A port has not established a link with

another network device or the LEDs are

turned off. To turn on the LEDs, use the

eco-friendly button.

Duplex

Mode

LED

Green A port is operating in full duplex mode.

Amber A port is operating in half-duplex mode at 10

or 100 Mbps. (Half-duplex mode does not

apply to 1000 Mbps operation.)

Flashing

Amber

Collisions are occurring on a port operating

at 10 or 100 Mbps.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

Sin comentarios

Allied-telesis x510 Series Manual de usuario Pagina 34