Allied-telesis Removable Power Supply and Fan Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
Installation Guide
15
Troubleshooting
If the PSU does not function as expected:
check that all cable connections are correct and secure.
check that the standby switch has been pressed and is in the On position
(DC models).
check that the PSU is receiving the correct AC voltage (AC models).
if LEDs indicate a PSU fault, replace the PSU or have your authorised Allied
Telesis distributor or reseller service it.
Troubleshooting information is also in the x900 Series Switch and
SwitchBlade
®
x908 Hardware Reference and the AT-10408XP Installation Guide. You
can download these documents from www.alliedtelesis.com/support/software.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios