Allied-telesis FastSwitch8 Manual de usuario descargar pdf (Pagina 10)

Product Description

Table 1 lists the dip switch settings.

Table 1

Dip Switch Settings

LED Indicators

The LED indicators are used to monitor and troubleshoot the switch. After the

switch is turned on, the LED indicators should respond as follows:

❑

All of the LED indicators will blink momentarily. This blinking of the

LED indicators represents a reset of the system.

❑

The F.D./Col LED indicator blinks yellow.

❑

The Power LED indicator will remain ON.

Table 2 provides an explanation of each indicator.

Port 1 Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8

10 Mbps

half-

duplex

10 Mbps

half-

duplex

10 Mbps

full-duplex

100 Mbps

full-duplex

100 Mbps

full-duplex

100 Mbps

full-duplex

100 Mbps

full-duplex

100 Mbps

full-duplex

Down

Default setting for all ports.

Auto-

negotiate

Auto-

negotiate

Auto-

negotiate

Auto-

negotiate

Auto-

negotiate

Auto-

negotiate

Auto-

negotiate

Auto-

negotiate

Table 2

LED Status

LEDs Color State Description

100 M Green ON

OFF

Indicates a 100 Mbps device is connected to a respective

port or the uplink port.

If a 10 Mbps device is connected to a respective port or

the uplink port, the LED indicator is OFF.

Link/

Activity

Green

Green Blinking

OFF

Secure the connection (or Link) to a device at any port.

Reception or transmission (Activity) of data at a port.

No link is established.

F.D./Col Yellow

Blinking Yellow

OFF

The respective port is in full-duplex mode.

Collisions are occurring on the respective port.

The respective port is in half-duplex mode.

Power Green ON The unit is receiving power.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comentarios a estos manuales

Sin comentarios

Allied-telesis FastSwitch8 Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis FastSwitch8