Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Manual de usuario descargar pdf (Pagina 200)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

RPS

Green

Red

Gray

The switch is receiving power from the redundant power

supply.

RPS has failed.

RPS is not installed or RPS monitoring is disabled.

DUPLEX

Green

Orange

The port is operating at full duplex.

The port is operating at half duplex.

Note - AT-9812T, AT-9812TF and AT-9812T-DC share the same device image.

Note - To turn RPS monitoring on or off on the switch, from the switch command line interface

enter the command SET SYSTEM RPSMONITOR={ON|OFF}. To see whether RPS monitoring is

on, use the command SHOW SYSTEM. To turn on RPS monitoring using SNMP, set the

fanAndPsRpsMonitoringStatus variable to on.

Note - The current firmware version does not allow AT-View Plus Device Manager to support the

RPS LED on the AT-9812T-DC model.

Agent Menu

From the Agent menu, you can view and edit the system information for the switch, or log into the

CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and description.

Power Supply Info

Displays information about the power supply, redundant power supply and power supply

monitoring.

Firmware Info

Displays a list of software releases installed on the switch.

File List

Displays a list of the files in the switch's file system.

Config File Name

Displays the file name of the start-up configuration file.

Chassis Temperature Info

Displays the actual temperature of the switch and the temperature status.

PN 613-50665 Rev A Page 200 of 257

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 256 257

Sin comentarios

Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Manual de usuario Pagina 200