Allied-telesis AT-S60 Manual de usuario descargar pdf (Pagina 182)

Chapter 15: MSTP Commands

180

migrationcheck This parameter resets a MSTP port, allowing it to

send MSTP BPDUs. When a MSTP bridge receives

STP BPDUs on an MSTP port, the port transmits STP

BPDUs. The MSTP port continues to transmit STP

BPDUs indefinitely. Set the migrationcheck

parameter to yes to reset the MSTP port to transmit

MSTP BPDUs.

Note

Each time a MSTP port is reset by receiving STP BPDUs, set the

migrationcheck parameter to yes, allowing the port to send MSTP

BPDUs.

Description

This command sets a port’s MSTP settings.

Examples

The following command sets the internal port cost to 1,000,000 and port

priority to 224 (increment 14) for Port 4 on the line card in Slot 9:

set mstp port=9.4 intportcost=1000000

portpriority=14

The following command changes Ports 6 to 8 on the line card in Slot 11

so they are not considered edge ports:

set mstp port=11.6-8 edgeport=no

The following command returns Port 7 on the line card in Slot 2 to the

default MSTP settings:

set mstp port=2.7 default

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 302 303

Sin comentarios

Allied-telesis AT-S60 Manual de usuario Pagina 182