Allied-telesis AT-S25 Manual de usuario descargar pdf (Pagina 93)

AT-S25 Version 1.4 User’s Guide

4. Select Add MAC address.

The Adding a Multicast Address window shown in Figure 46 is

displayed.

Figure 46 Adding a Multicast Address Window

5. In the VLAN Name field, enter the name of the VLAN to receive the

multicast frames. Press <Return>.

6. In the MAC Address field, enter the MAC address of the multicast

stream. Press <Return>.

7. In the Ports for Multicast field, enter one or more port numbers that

are members of the specified VLAN and that are to receive the

multicast packets from the device. Press <Return>.

You can use one of the following formats to specify the port

numbers:

Single port (for example, 1)

Several ports separated by comma (for example, 3, 8, 22)

Range of ports (for example, 4-16)

All ports by entering the word “all”

You can combine these different formats in a single line.

Any port can have more than one multicast address associated

with it. The number of multicast addresses you can configure is

limited to ten (10) per switch.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 165 166

Sin comentarios

Allied-telesis AT-S25 Manual de usuario Pagina 93