Allied-telesis AT-S20 Manual de usuario Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 124
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
Configuring IP Parameters
4-6
&RQILJXULQJ#,3#3DUDPHWHUV
0HQX1#
System Configuration> IP parameters
This option applies to TCP/IP based networks only. Some IP
parameters are required and others have default values you may
keep. There are also optional parameters for information purposes
only.
Note
If you have a BootP server and you have mapped the switch’s MAC
address to IP parameters, the switch will obtain its IP parameters from
the server.
1. Select
System Configuration,
then
IP parameters
.
2. Select the parameter you want to configure from the following
list. Then select
Return to Main Menu
.
Note
If you have a generic (dumb) terminal configuration, enter the letter
corresponding to your choice.
Ip address: 141.00.01.00
Subnet mask: 255.255.0.0
Gateway address:
Domain Name Server
Default Domain Name
Manager address: Null (not configured)
Manager address: Null (not configured)
Manager address: Null (not configured)
Manager address: Null (not configured)
Download Password: *****
Get community string: public
Set community string: private
Trap community string: public
Location: Null (not configured)
Contact: Null (not configured)
Return to System Administrator Menu ...
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 123 124

Comentarios a estos manuales

Sin comentarios