Allied-telesis AT-MR820T Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 66
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
AT-MR420T and AT-MR820T Installation Guide
7
Attach a second 10Base-T UTP RJ45 connector to 10Base-T network
port 2. The Port 2 LINK OK LED on the front panel should now light,
provided the 10Base-T device on the opposite end of the UTP cable is
operational.
AUI Network Port
Each repeater has one AUI port to accommodate a 10Base5 (standard
or thick Ethernet cable) connection to the network backbone using an
AUI.
LED Status Indicators
The front panel indicators are grouped into the following categories:
Network Load
Port Status
Hub Status
Network Load Indicators
Eight Network Load LEDs indicate the percentage of network
utilization. Figure 4 shows these LEDs.
Figure 4: Network Load Indicators
MRx20T(UTP)Ver6_Book Page 7 Thursday, April 3, 1997 5:18 PM
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 65 66

Comentarios a estos manuales

Sin comentarios