Allied-telesis AT-MCR12 Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
AT-MCR12 Media Conversion Rack-Mount Chassis Installation Guide
39
Powering on an AC-Powered Chassis
To power on the chassis, perform the following procedure:
1. Connect the power cord to the power supply.
2. Plug the other end of the power cord into a wall outlet.
3. Verify that the power on LED is illuminated and the power supply
cooling fan is operating normally.
Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord. E3
Pluggable Equipment. The socket outlet shall be installed near
the equipment and shall be easily accessible. E5
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Comentarios a estos manuales

Sin comentarios