Allied-telesis AT-MC1001SC/GS4 Manual de usuario descargar pdf (Pagina 20)

Installing the Media Converter

The following sections explain how to install the media converter. The media

converter can be installed on a table or in an AT-MCR12 chassis.

Planning the Installation

Be sure to observe the following guidelines when planning the installation of

your media converter.

❑

The nodes connected to the media converter must operate at 1000

Mbps.

❑

The two nodes connected to the ports of the media converter must

operate with the same duplex mode, either half- or full-duplex. The

media converter itself can operate in either mode.

❑

The devices connected to the two ports on the media converter can be

network adapter cards, repeaters, switches, or routers.

❑

Be sure to observe the cabling specifications. Refer to “Cabling

Specifications” below.

Cabling Specifications

Table 3 list the IEEE 802.3u cabling specifications for the AT-MC1001 Series

Media Converters.

Table 3

Cabling Specifications

Port Cable Type Maximum Distance

1000Base-SX

All Models 62.5/125

m multimode fiber 275 m (902 ft)

50/125

m multimode fiber 550 m (1,804 ft)

1000Base-LX

AT-MC1001 62.5/12 5

m multimode fiber 550 m (1,804 ft)

50/12 5

m multimode fiber 550 m (1,804 ft)

10/125

m single-mode fiber 10,000 m (32,800 ft)

AT-MC1001/GS2 10/125

m single-mode fiber 20 km (12.4 mi)

AT-MC1001/GS3 10/125

m single-mode fiber 50 km (31 mi)

AT-MC1001/GS4 10/125

m single-mode fiber 70 km (43.4 mi)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-MC1001SC/GS4 Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-MC1001SC/GS4