Allied-telesis AT-LX3800U Manual de usuario descargar pdf (Pagina 29)

AT-LX3800U Multi-Service Transport System Installation and Maintenance Guide

Management Connections

The AT-LX3800U chassis provides two management connections to the

preinstalled AT-S65 management software:

 RS-232 terminal port for local (out-of-band) management

 10/100Base-TX Ethernet port for remote management using Telnet

Terminal Port You can use the terminal port to establish a local (out-of-band)

management session with the chassis to configure parameters and also

view information about the operating of the system and line cards. You

establish a local management session with the switch by connecting either

a terminal, or a personal computer with a terminal emulation program, to

the port.

The terminal port has a DIN-8 style connector. A management cable is

supplied with the chassis.

The terminal port is set to the following specifications:

 Baud rate: 115200 bps

 Data bits: 8

 Parity: None

 Stop bits: 1

You can use the AT-S65 management software to change the terminal

port settings.

10/100Base-TX

Ethernet Port

You can also manage the AT-LX3800U chassis from any workstation on

your network through the 10/100Base-TX Ethernet port using Telnet.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 109 110

Sin comentarios

Allied-telesis AT-LX3800U Manual de usuario Pagina 29