Allied-telesis AT-GS950/48 Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
AT-GS950/48 Gigabit Ethernet WebSmart Switch Installation Guide
39
Installing the Switch in a Rack
To install the AT-GS950/48 Gigabit Ethernet Smart switch in a rack,
perform the following procedure:
Note
The rack mount screws are not provided.
1. If attached, remove the rubber feet using a flat-head screwdriver as
shown in Figure 1.
1. Removing Feet from Switch
2. Install a bracket on one side of the switch using a Phillips screwdriver
and four of the rack-mount screws included with the switch, as shown
in Figure 9
Caution
The brackets provided must be used to securely mount the switch
on the rack.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Comentarios a estos manuales

Sin comentarios