Allied-telesis AT-8550 Manual de usuario descargar pdf (Pagina 31)

A-1

Appendix A

Safety Information

Important Safety Information

Note

Please read the following safety information thoroughly before installing the

switches.

Installation and removal of the unit must be carried out by qualified personnel

only.

To reduce the risk of fire or electrical shock, install the unit in a temperature-

and humidity-controlled indoor area free of conductive contaminants.

Power

To ensure compliance with international safety standards, only use the power

adapter that is supplied with the unit.

The unit must be connected to a grounded outlet to comply with European

safety standards.

Do not connect the unit to an AC outlet (power supply) without a ground

connection.

The socket outlet must be near to the unit and easily accessible. You can only

remove power from the unit by disconnecting the power cord from the outlet.

The appliance coupler (the connector to the unit and not the wall plug) must

have a configuration for mating with an EN60320/IEC320 appliance inlet.

France and Peru only

This unit cannot be powered from IT supplies. If your supplies are of IT type,

this unit must be powered by 230V (2P+T) via an isolation transformer ratio

1:1, with the secondary connection point labeled Neutral, connected directly

to ground.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Sin comentarios

Allied-telesis AT-8550 Manual de usuario Pagina 31