Allied-telesis AT-2912T Manual de usuario descargar pdf (Pagina 26)

Chapter 2: Installing the Hardware

Replacing the Bracket

Depending on your PC, you may need to replace the bracket attached to

your adapter. The AT-2712FX/SC and AT-2712LX20/SC adapters are

shipped with the low-profile bracket attached to the adapter. The AT-

2912T adapter is shipped with the standard bracket attached to the

adapter.

The following procedures describe how to replace a bracket:

 “Replacing the Low-Profile Bracket” on page 26

 “Replacing the Standard Bracket” on page 28

In both procedures, the AT-2712FX/SC adapter is shown in the

illustrations. However, you can perform the procedures on all three

adapters.

Replacing the

Low-Profile

Bracket

To replace the low-profile bracket with the standard bracket, perform the

following procedure:

1. Remove the screws that attach the bracket to the adapter. See

Figure 5.

Figure 5. Removing the Low-Profile Bracket

1479

100

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 99 100

Sin comentarios

Allied-telesis AT-2912T Manual de usuario Pagina 26