Allied-telesis AT-2701 Series Adapters Manual de usuario descargar pdf (Pagina 52)

Configuring the Ethernet Interface for Linux Systems

Overview

When you use the AT-2701 series fiber optic adapter on a PC with the

Linux system, you must configure the Ethernet interface for the fiber optic

port.

Note

If you install the AT-2701FTXa model and use the copper port, no

changes in the Ethernet interface are necessary.

The AT-2701 series adapters use a Linux inbox driver to operate. A driver

supplied with an operating system is called an inbox driver. Current Linux

systems come with the inbox driver that the AT-2701 series adapters

need.

Since the driver software for the AT-2701 series adapters has already

been in place, you do not need to install it; however, the speed and duplex

mode for the fiber optic port are not automatically negotiated. You must

disable Auto-negotiation and sets these properties for the AT-2701 series

fiber optic port manually. In addition, you must set the same property

values on the port interfaces of the connected switch.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 93 94

Sin comentarios

Allied-telesis AT-2701 Series Adapters Manual de usuario Pagina 52