Allied-telesis AR720 ROUTER Manual de usuario descargar pdf (Pagina 6)

6 AR720 ROUTER QUICK START GUIDE

Getting Connected

3 Select “Terminal Emulation” from the Settings menu. In the

Terminal Emulation dialog box check “DEC VT-100 (ANSI)” and

click “OK”.

4 Select “Terminal Preferences” from the Settings menu. In the

Terminal Preferences dialog box uncheck “Local Echo”, “CR ->

CR/LF”, and “Use Function, Arrow, and Ctrl Keys for Windows”.

Set other parameters as required, then click “OK”.

This section describes how to connect the AR720 router to

different physical devices and networks. Before you start, you

should be aware that the AR720 router refers to its physical

interfaces as ports and these are numbered, starting at 0. Ports

on the base unit are numbered first, followed by ports on PICs

(Port Interface Cards) in Bay 0 and Bay 1. For example, eth0 is the

first Ethernet port and syn1 is the second synchronous port.

USING WINDOWS TERMINAL OR WINDOWS

HYPERTERMINAL AS THE CONSOLE

You can use a PC running terminal emulation software as the

manager console, instead of a terminal. There are many terminal

emulation applications available for the PC, but the most readily

available are the Terminal and HyperTerminal applications

included in Microsoft

Windows™ 3.1 and Windows 95,

respectively. In a normal Windows™ installation Terminal is

located in the Accessories group. In Windows 95 HyperTerminal

is located in the Start > Programs > Accessories menu.

The key to using terminal emulation software successfully with

the AR720 router is to configure the communications

parameters in the terminal emulation software to match the

default settings of the console port on the router. The following

procedures describe how to configure Windows™ Terminal and

HyperTerminal for the default console port settings on the

AR720 router, but the same principles apply to other terminal

emulation programs.

To configure Windows™ Terminal, follow these steps:

1 In Windows 3.1, double-click the Terminal icon in the

Accessories group in Program manager.

2 Select “Communications” from the Settings menu. The

Communications dialog box is displayed.

Set “Baud Rate” to 9600, “Data Bits” to 8, “Stop Bits” to 1,

“Parity” to None, “Flow Control” to Hardware and “Connector”

to the COM port on the PC used to connect to the router.

Uncheck the “Parity Check” and “Carrier Detect” checkboxes.

Click “OK” to accept the new settings and close the dialog box.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Comentarios a estos manuales

Sin comentarios

Allied-telesis AR720 ROUTER Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AR720 ROUTER