Allied-telesis AlliedView-EMS 3.10 AMIGO Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 43
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
Port number
The UDP port number on which the target device is listening for SNMP
messages. If the target device is using a non-standard port for SNMP
operations, you must change this value.
SNMP version
The version of SNMP that the device will use to send and receive device
information. After choosing the version of SNMP to use, click on the
Settings button to specify the SNMP parameters that correspond with
the chosen version. If the SNMP version is set to "v1" or "v2c", then the
SNMP v1/v2c Settings dialog box will be displayed. Otherwise, if the
SNMP version is set to "v3", then the SNMP v3 Settings dialog box will be
displayed.
Target Host Property dialog box
4.1.6.3.1 SNMP v1 / v2c Settings
Community for read/Community for write
The community strings used to perform SNMP operations on the device.
AlliedView™-EMS 3.10 AMIGO USERS GUIDE Page 26 of 43
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 42 43

Comentarios a estos manuales

Sin comentarios