Allied-telesis AT-WCC201G Manual de usuario descargar pdf (Pagina 43)

AT-WCC201G Wireless Adapter Card Installation Guide

3. Click Data Encryption and select either TKIP (Temporal Key Integrity

Protocol) or AES (Advanced Encryption Standard) from the pull-down

menu. The encryption method must be the same on both the wireless

node and the wireless access point.

4. Click the Authentication Config button.

The Advance Security Settings window is shown in Figure 25.

Figure 25. Advance Security Settings Window

5. Click the WPA Passphrase field and enter the passphrase (also

referred to as the shared secret) from the wireless router or access

point.

6. Click OK to close the Advance Security Settings window.

Note

You must assign the profile an IP address. To set the IP address

now, go to step 5 in “Configuring the IP Address” on page 45. To set

the IP address at another time, complete this procedure.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Sin comentarios

Allied-telesis AT-WCC201G Manual de usuario Pagina 43