Allied-telesis AT-WA7400 Manual de usuario descargar pdf (Pagina 42)

Chapter 2: Installation

Running KickStart to Find Access Points on

the Network

KickStart is an easy-to-use utility for discovering and identifying

new AT-WA7400 Wireless Access Points. KickStart scans the

network looking for access points, displays ID details on those it

finds, and provides access to the AT-WA7400 Management

Software.

Note

KickStart (and the other AT-WA7400 tools) recognizes and

configures only AT-WA7400 Wireless Access Points. KickStart

does not find or configure non-AT-WA7400 Wireless Access

Points and will not find any other devices.

Note

Run KickStart only in the subnet of the internal network (SSID).

Note

KickStart finds only those access points that have IP addresses.

IP addresses are dynamically assigned to access points if you

have a DHCP server running on the network. If you deploy the

access point on a network with no DHCP server, the default

static IP address (192.168.1.230) is used.

Caution

Use caution with non-DHCP enabled networks: Do not

deploy more than one new access point on a non-DHCP

network because they will use the same default static IP

addresses and conflict with each other.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 61 62

Sin comentarios

Allied-telesis AT-WA7400 Manual de usuario Pagina 42