Allied-telesis AT-TS24TR Manual de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 95
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
TurboStack Hubs with Management
55
By setting the MDI/MDI-X switch to MDI, you can connect two hubs via
standard straight-through cable. The switch affects Port 1 only; you can
continue to use Ports 2 through 24 for network connections via straight-
through cable, no matter which way you set the MDI/MDI-X switch.
If you connect a straight-through cable (or any cable for that matter)
between two hubs (or any two nodes) and the network, LEDs do not
indicate a link condition, you can change the MDI/MDI-X switch. The
repeater will not be damaged if the MDI switch is in the wrong position.
Port Indicators
The port indicators on the AT-TS24TR front panel provide visual
diagnostic and activity information for network analysis. The AT-TS24TR
provides a central bank of indicators for box-level monitoring.
As shown in Figure 53, each 10BASE-T port supports the following
indicator functions with one dual-color front panel LED per port:
Figure 52: MDI/MDI-X Switch
MDI/MDI-X switch
Figure 53: AT-TS24TR Port
LEDs
Port
activity
LEDs &
symbols
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 94 95

Comentarios a estos manuales

Sin comentarios