Allied-telesis AT-S68 Manual de usuario descargar pdf (Pagina 54)

Virtual LANs

Modifying a VLAN

To modify a VLAN, you must know the VID of the VLAN that you want to

modify. To view the VLAN’s ID, refer to Showing VLANs on page 59.

To modify a VLAN, perform the following procedure:

1. From the Main Menu, type 2 to select VLAN Menu. The VLAN Menu in

Figure 17 on page 50 is displayed.

2. From the VLAN Menu, type 2 to select Modify VLAN. The Modify VLAN

Menu in Figure 20 is displayed.

Figure 20 Modify VLAN Menu

3. Type 1 to select VLAN ID (VID). The VLAN ID is used to identify which

VLAN you want to modify. The following prompt is displayed:

Enter new value [1 to 26] ->

Note

If you have forgotten the VLAN ID, type R twice then 2 to show

VLANs. Type N to scroll through the configured VLANs until you

identify the VLAN ID needing modification. Note the VLAN ID and

return to the VLAN Menu by typing R then 1 and then 2 to return to

the Modify VLAN Menu.

4. Enter the VID of the VLAN you want to modify and press <Enter>.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 89 90

Sin comentarios

Allied-telesis AT-S68 Manual de usuario Pagina 54