Allied-telesis AT-S39 Manual de usuario descargar pdf (Pagina 100)

Chapter 11: Spanning Tree Protocol Commands

100

For example, if you use the default 20, all bridges

delete current configuration messages after 20

seconds. The range is 6 to 40 seconds. The default is 20

seconds.

Note

The value for the maxage parameter must be greater than

(2 x (hellotime +1)) and less than (2 x (forwarddelay -1)).

Description

This command sets the following STP bridge parameters

❑ Bridge priority

❑ Hello time

❑ Forwarding delay

❑ Maximum age time

Examples

The following command sets the hello time to 7 seconds and the

forwarding delay to 25 seconds:

set stp hellotime=7 forwarddelay=25

The following command returns all STP settings on the switch to the

default values:

set stp default

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 202 203

Sin comentarios

Allied-telesis AT-S39 Manual de usuario Pagina 100