Allied-telesis AT-S29 Manual de usuario Pagina 59

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 136
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 58
AT-S29 Management Software User’s Guide
59
802.1Q VLAN Base Information
The 802.1Q VLAN Base Information screen displays basic information on
the VLAN type support by this switch.
802.1Q VLAN Current Table Information
This screen shows the current port members of each VLAN and whether
or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However,
if you just want to create a small port-based VLAN for one or two
switches, you can assign ports to the same untagged VLAN. The current
configuration is shown in the following screen.
802.1Q VLAN Base Information
=============================
VLAN Version Number : 1
MAX VLAN ID : 2048
MAX Supported VLANs : 16
Current Number of 802.1Q VLANs Configured : 1
APPLY> <OK> <CANCEL> <PREV Unit> <NEXT UNIT> <PREV PAGE>
<NEXT PAGE>
Use <TAB> or arrows keys to move, other keys to make
changes.
Parameter Description
VLAN Version
Number
The VLAN version used by this switch as specified
in the IEEE 802.1Q standard.
MAX VLAN ID Maximum VLAN ID recognized by this switch.
MAX Supported
VLANs
Maximum number of VLANs that can be
configured on this switch.
Current Number of
VLANs Configured
The number of VLANs currently configured on
this switch.
Vista de pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 135 136

Comentarios a estos manuales

Sin comentarios