Allied-telesis AT-S24 Manual de usuario Pagina 110

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 164
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 109
Configuring Virtual LANs and Quality of Service
110
Creating a Port-based or Tagged VLAN
Only one VLAN is defined by default on an AT-8200XL Series Switch. This
VLAN is named Default VLAN. The Default VLAN is assigned a VLAN ID
and PVID of 1. All the ports on the switch are initially port-based
(untagged) members of the Default VLAN.
The procedure for creating a new VLAN consists of three phases:
Phase 1:
Name the VLAN.
Assign a VLAN ID (VID) number to the VLAN.
Designate which ports are to be members of the VLAN.
Define which, if any, ports will be tagged ports.
Phase 2:
Remove the untagged ports from the existing VLAN.
Phase 3:
Change the PVID of the untagged ports in the new VLANs to
match the VID.
Phase 1
To perform Phase 1, do the following:
1. From the Omega Main Menu, select Virtual LANs/QoS. The Virtual
LAN/QoS menu in Figure 53 is displayed.
Figure 53 Virtual LAN/QoS Menu
Vista de pagina 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 163 164

Comentarios a estos manuales

Sin comentarios