Allied-telesis AT-MR908TX Manual de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
AT-MR908TX Installation Manual
23
— When Port 1 of the AT-MR908TX is not connected to another hub
but is used to connect to a workstation or other equipment, you
should set the MDI/MDI-X slide switch to MDI-X.
4. Problem 4:
There is signal loss between the hub and one of the attached network
nodes.
Solution 4:
Make sure the distance between the hub and the connected network
device is no greater than 100 meters.
— Make sure you are using Category 5 cable.
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 61 62

Comentarios a estos manuales

Sin comentarios