Allied-telesis AT-MCR1 Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Chapter 2: Installation
22
Installing a Media Converter in the Chassis
To install a media converter in the AT-MCR1 chassis, perform the
following procedure:
1. Remove all components from the shipping packages.
Note
Store the packaging material in a safe place. You must use
the original shipping material if you need to return the unit to
Allied Telesis.
2. Loosen the captive screw on the mounting rail and remove it
from the chassis, as shown in Figure 3.
Figure 3. Removing the Mounting Rail from the Chassis
1048
P
W
R
AT-MCR1
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Comentarios a estos manuales

Sin comentarios