Allied-telesis AT-MC106XL Manual de usuario descargar pdf (Pagina 8)

Key Features

The media converters have the following key features:

❑

LEDs for unit and port status

❑

MDI/MDI-X Switch

❑

NML/LNK TST Switch

❑

100Base-TX ports participate in auto-negotiation for 100 Mbps and

half- or full-duplex modes

❑

MissingLink



provides link fault detection on 100Base-TX segments

❑

External AC-DC Power Adapter

❑

Standard, compact size for use with AT-MCR12 rack-mount chassis

❑

Low power consumption

Note

For definitions of technical terms associated with Allied Telesyn products,

refer to the Glossary on Allied Telesyn’s website at

www.alliedtelesyn.com.

LEDs

The PWR LED in the upper right corner of the front panel lights when the

media converter is receiving power. Status LEDs are located on the front panel

next to each port and described in Table 1.

Table 1

LEDs

MDI/MDI-X Switch

The MDI/MDI-X (Media Dependent Interface/Media Dependent Interface with

Crossover) switch, located on the front panel, is a straight-through or

crossover cable selection switch. It enables the RJ45 port to be connected to a

repeater or DTE device without using a special crossover cable. The default

position of the switch is MDI-X, which means you can connect the RJ45 port to

a workstation or to any other DTE device using a straight-through cable.

LED Color State Description

PWR Green

Power is applied.

NML Green

OFF

Unit is operating in normal mode.

Unit is operating in link test mode.

REC Green

Data is being received on the port.

LNK Green

Link established on the port.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comentarios a estos manuales

Sin comentarios

Allied-telesis AT-MC106XL Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-MC106XL