Allied-telesis AT-GS908 Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
Installation
20
Installing the Switch in a Rack
To install the AT-GS908 in a standard 19-inch rack, perform the following
procedure:
1. If attached, remove the rubber feet by using a flat-head screwdriver
as shown in Figure 8.
Figure 8 Removing the Rubber Feet
2. Attach a bracket to one side of the switch using the bracketmounting
screws that came with the switch. See Figure 9.
Figure 9 Attaching Rackmounting Brackets
3. Install the second rackmounting bracket on the other side of the
switch using the remaining bracketmounting screws.
4. Mount the switch in the 19-inch rack using four rackmounting screws
(not provided).
5. Refer to Step 4 on page 18 in the previous section to complete the
installation.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

Comentarios a estos manuales

Sin comentarios