Allied-telesis AT-GS905 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
AT-GS905 Gigabit Ethernet Switch Installation Guide
25
Unpacking the Switch
To unpack an AT-GS905 switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your
switch package. If any item is missing or damaged, contact your
Allied Telesyn sales representative for assistance.
One AT-GS905 Gigabit Ethernet Switch
External AC/DC power adapter
Four rubber protective feet
Two drywall anchors
Two mounting screws
This installation guide
Warranty card
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 48 49

Comentarios a estos manuales

Sin comentarios