Allied-telesis AT-8324SX Manual de usuario descargar pdf (Pagina 17)

AT-8324SX Quick Install Guide

Switch LEDs

Table 1 describe the functions of the LEDs on the Ethernet switch.

For information on troubleshooting the switch, refer to the

AT-8324SX Fast

Ethernet Switch Installation Guide

Table 1

Port and System Status LEDs

LED Condition Status

System

PWR On Switch is receiving power.

RPS On Redundant power is on and the RPS is in the

backup or active mode.

Off Redundant power is off or has failed.

MGMT On Agent is operational.

RJ-45 Ports

Link On Port has established a valid network connec-

tion.

Amber Valid 10 Mbps connection.

Green Valid 100 Mbps connection.

Flashing Port has been partitioned due to an abnormal

network condition, or manually disabled.

Activity

1. Use the MODE Select button to select LED display mode.

On Traffic is passing through the port.

FULL DUP

On Port has been set to full-duplex.

FLOW

On Flow control enabled.

Module Ports

STATUS On A module is installed in the slot.

ACT Flashing Traffic is passing through the port.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Sin comentarios

Allied-telesis AT-8324SX Manual de usuario Pagina 17