Allied-telesis AT-8324 Manual de usuario descargar pdf (Pagina 14)

Installing the Switch

Installing the Switch in a Rack

To install the Ethernet switch in a standard 19-inch rack, perform the

following procedure:

1. Remove all components from the shipping package and store the

packaging material in a safe location.

2. Locate a level, secure surface for the switch.

3. If you purchased an expansion module for the switch, install the module by

performing the instructions in either of the following manuals:

AT-8316F/MT, AT-8316F/VF, AT-8316F/SC, and AT-8324 Installation

Guide or AT-15/LX, AT-A15/SX, AT-A16, AT-A17, AT-A18, and AT-A19

Quick Install Guide.

4. Remove the snap-on plastic feet from the bottom of the switch, as shown in

Figure 5.

Figure 5

Removing the Feet

5. Attach the mounting brackets to each side of the switch, using the six

flathead screws that came with the switch package as shown in Figure 6.

Figure 6

Attaching Rackmounting Brackets

6. Mount the switch in the rack using standard screws (not provided).

MIRROR PORT

RS-232

TERMINAL PORT

STATUS

LINK

RESET

FAULT

MASTER

RPS

PWR

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Sin comentarios

Allied-telesis AT-8324 Manual de usuario Pagina 14