Allied-telesis AT-8126XL Manual de usuario descargar pdf (Pagina 28)

Installation

2-6

4. Mount the switch in the rack using standard screws (not

provided).

5. Ensure that there is unrestricted air flow around the switch.

6. Apply power to the unit as follows:

Caution

Power cord is used as a disconnection device. To de-energise

equipment disconnect the power cord.

Attach the power cord to the unit and plug it in the wall outlet.

Verify that the Power LED lights green. See Table 2-1 on page

2-4.

As power is applied to the switch, the Fault LED flashes as the

switch runs internal self testing.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Sin comentarios

Allied-telesis AT-8126XL Manual de usuario Pagina 28