Allied-telesis AT-8000S Manual de usuario descargar pdf (Pagina 39)

Technical Specifications

Page 39

Compliance Standards

The devices conform to the following compliance standards:

• The Environmental standard, per ATI QLT 1220

• RoHS compliant

• The EN50082-1 immunity standard

• The following safety standards:

– UL1950

– CSA22.2 no.950

– TUV (EN60950)

– CE

• The following EMI/Emission standards:

– FCC Class A

– EN55022 Class A

– VCCI Class A

– C-TICK

Cable, Port, and Pinout Information

This section describes the devices physical interfaces and provides information about cable connections. Stations

are connected to the device ports through the physical interface ports on the front panel. For each station, the

appropriate mode (Half/Full Duplex, Auto) is set.

Pin Connections for the 10/100/1000 Ethernet Interface

The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables.

Transmission devices connected to each other use crossed cables. The following figure illustrates the pin

allocation.

Figure 21: RJ-45 Pin Allocation

The following table describes the pin allocation

Table 9: RJ-45 Pin Connections for 10/100/1000 Base-T

Pin Use

1 TxRx 1+

2 TxRx 1-

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Sin comentarios

Allied-telesis AT-8000S Manual de usuario Pagina 39