Allied-telesis AT-3726 Manual de usuario descargar pdf (Pagina 29)

AT-3714F and AT-3726 Installation Guide

2-11

Figure 2-5 Connecting the 50-Pin Female Connector

6. Attach the three Phillips panhead screws that were shipped with the

MDA.

7. Apply power to the unit as follows:

Caution

Power cord is used as a disconnection device. To de-energise equip-

ment disconnect the power cord. A-10

Re-attach the power cord to the unit and plug it in the wall outlet.

Verify that the PWR LED lights green. See Table 2-4.

MDA LEDs Table 2-4 lists and deﬁnes the MDA LEDs. Note that the MDA LEDs

are located on the front panel of the switch under Port Activity.

For troubleshooting techniques, see Chapter 3, “Troubleshooting.”

PORT B

100BASE-TX

10BA

1X 3X 5X 7X 9X 11X

4X 6X

3701

100BASE-TX

Centre

Table 2-4 Media Dependent Adapter LEDs

LED Color State Description

LINK Green ON There is a good physical

link with a device.

ACTIVITY Green Flashing

or ON

The Ethernet port is

receiving/transmitting

packets.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Sin comentarios

Allied-telesis AT-3726 Manual de usuario Pagina 29