Allied-telesis AT-2746FX Manual de usuario Pagina 25
- Pagina / 238
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Network Adapter Card Installation Guide
25
AT-2700FTX and AT-2701FTX Series
The adapters in the AT-2700FTX Series are:
AT-2700FTX/SC
AT-2700FTX/ST
AT-2700FTX/MT
AT-2700FTX/VF
The adapters in the AT-2701FTX Series are:
AT-2701FTX/SC
AT-2701FTX/ST
AT-2701FTX/MT
AT-2701FTX/VF
These dual-port adapters feature a 10/100Base-TX twisted pair port and a
100Base-FX fiber optic port. The twisted pair port features Auto-
Negotiation and can operate at either 10 or 100 Mbps, half- or full-duplex
mode. The fiber optic port has a fixed operating speed of 100 Mbps
(100Base-FX), half- or full-duplex mode, and a maximum operating
distance of 2 kilometers (1.28 miles) in full-duplex mode. Maximum
distance for the fiber optic port is less for half-duplex mode.
Note
You can use only one port on this adapter at a time. Do not attach
both ports to the network at the same time.
Differences between the two series are:
The AT-2700FTX Series is PCI 2.1-compliant.
The AT-2701FTX Series is PCI 2.2-compliant.
The AT-2700FTX Series was offered in two versions — a standard
version and a low profile version for systems that accept only low
profile adapters.
The AT-2701FTX Series can be installed in either a standard or low
profile system. The adapter comes with two brackets, one for a
standard system and another for a low profile system.
The BootPROM chip and MBA were optional with the AT-2700FTX
Series.
The BootPROM chip and MBA come standard with the AT-2701FTX
Series.
- Installation 1
- Industry Canada 3
- Contents 5
- Document Conventions 10
- Contacting Allied Telesyn 12
- Network Adapter Card Overview 13
- Overview 14
- Additional Features 35
- Installation and 36
- Virtual LANs and 37
- Protocol 37
- Operating 38
- Statistics and the 38
- Load Balancing 39
- Fail-over Protection 41
- Managed Boot 43
- Chapter 2 45
- Verifying Package Contents 46
- Reviewing Safety Precautions 47
- X RX 50
- X R 50
- Chapter 3 57
- Guidelines 59
- AT-Setup 59
- AT-Setup from 60
- AT-Setup from a 66
- Diskette 66
- Manually Installing a Driver 73
- Manually Updating a Driver 77
- 2. Select the Hardware tab 79
- Removing a Driver 85
- Figure 46. Properties Window 86
- Figure 47. Hardware Tab 87
- Configuring the 92
- IP Address 92
- Subnet Mask, and 92
- Gateway Address 92
- Configuring 96
- Additional 96
- Network Adapter 96
- Card Settings 96
- Figure 56. Properties Window 97
- Microsoft Windows NT 4.0 107
- Figure 64. Network Window 110
- 7. Select the Adapters tab 111
- Figure 65. Adapters Tab 111
- Figure 71. Network Window 116
- Novell Netware 6.5 119
- Files Needed for 120
- New Server 120
- Multiple 122
- Adapters 122
- Removing an 123
- Adapter Driver 123
- Netware 6.5 123
- Chapter 5: Novell Netware 6.5 124
- Linux 2.4 and 2.6 125
- Building the 126
- Installing the 126
- Changing 127
- Configuration 127
- Settings 127
- Chapter 6: Linux 2.4 and 2.6 128
- Solaris 9 129
- Supported Operating System 130
- Installing the Driver 130
- Removing the Driver 132
- AT-Stat Utility 133
- Installing with a 134
- CD Drive 134
- 2. Select Tools 135
- Figure 74. Tools Window 135
- Chapter 8: AT-Stat Utility 136
- Installing without 140
- Using the AT-Stat Utility 142
- Removing the AT-Stat Utility 153
- AT-MUX Multiple VLAN Protocol 157
- AT-MUX Protocol Overview 158
- 3. Select Install 164
- Protocol) is added to 167
- Removing the AT-MUX Protocol 173
- AT-Diag Utility 175
- Starting the AT-Diag Utility 176
- Select NIC 178
- Diagnostics Tests Option 179
- Chapter 10: AT-Diag Utility 180
- Esc : Exit 181
- Live Network Test 181
- F5 : Start Sending 181
- Packets Sent 181
- Hardware Information Option 183
- EEPROM Settings 184
- Speed / Duplex 184
- Default Port 184
- Select Adapter Option 186
- Technical Support Option 187
- Troubleshooting 189
- Chapter 11: Troubleshooting 190
- Technical Specifications 193
- Twisted Pair Port Pin-outs 194
- Unattended Microsoft Windows 195
- Installations 195
- What the Steps 196
- Switch Settings 199
- Installing a BootPROM Chip 200
- DIP Switch Settings 202
- Appendix D 203
- PUSH OPENPUSH OPEN 204
- Using a Swab 206
- Translated Safety Statements 209
- Laser Safety Notices 210
- Electrical Safety Notices 210
- Lasersicherheitshinweise 214
- Avisos de seguridad láser 218
- Avis de sécurité laser 222
- Avis de sécurité électrique 222
- Лазерная безопасность 230
- Электрическая безопасность 230
Relacionado con productos y manuales para Hardware De La Computadora Allied-telesis AT-2746FX
(2 paginas)
(40 paginas)
(38 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.192 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales