Allied-telesis 9700 iMAP Manual de usuario descargar pdf (Pagina 20)

Install the ATI 9700 Chassis into the Rack Ensure all components for desired configuration

ATI 9700 - Installation Guide (Initial Installation of the ATI 9700)

1-14

FIGURE 1-10

Slide the FAN8 into the chassis

Seat the FAN8 into the shelf by pressing firmly on each side of the assembly at the lock-latch position (do not

use the lock-latch to seat the card). Close the lock-latches on each side of the faceplate. Figure 1-11, Figure

1-12

FIGURE 1-11

Swing the lock-latches in to close them

FIGURE 1-12

Close the lock-latch

1.8 Install the ATI 9700 Chassis into the Rack

1.8.1 Ensure all components for desired configuration are present

Referring back to Table 1-1 as a guide, ensure that all components used for the installation are present:

Enter into your office records the serial number of the chassis, which will be a S/N label on the rear of the

chassis. (This may be needed if the ATI 9700 requires troubleshooting.)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Sin comentarios

Allied-telesis 9700 iMAP Manual de usuario Pagina 20