Allied-telesis AT-PWR02 Manual de usuario

Installation GuideRemovable Power Supply and FanAT-PWR01AT-PWR02AT-PWR05AT-FAN01AT-FAN03

Installation Guide9Connecting an AC power supplyFollow these instructions to connect an AT-PWR01, AT-PWR02, or AT-PWR05 AC PSU to an AC power supply:W

Removable Power Supply and Fan103. Connect the power cord to the main power source.4. Check that the Run/Standby switch is set to the Run position (1)

Installation Guide11Connecting a DC power supplyFollow these instructions to connect an AT-PWR01-80 DC PSU to a DC power supply. Only trained and qual

Removable Power Supply and Fan125. Ensure there are no exposed cable strands.6. Replace the cover. You must replace the transparent plastic terminal c

Installation Guide13Checking LEDsLEDs on PSUs, fans, and the front panels of switches indicate the operational status of the devices. After you have i

Removable Power Supply and Fan14Switch The following table describes how LEDs on the switch report operations and faults with installed PSUs and FOMs.

Installation Guide15Removing a Power Supply Unit or FanFollow these instructions to remove a PSU, chassis fan module or FOM.Before you begin Read the

Removable Power Supply and Fan16TroubleshootingIf the PSU does not function as expected: Check that all cable connections are correct and secure. On

Installation Guide17Obtaining Documentation and ResourcesThe complete document set for x900 Series switches and SwitchBlade x908 includes: this Insta

Removable Power Supply and Fan18AT-TFTP Server for Windows is a TFTP (Trivial File Transfer Protocol) server for transferring software versions, confi

Removable Power Supply and FanInstallation GuideAT-PWR01AT-PWR02AT-PWR05AT-FAN01AT-FAN03Download the complete document set fromwww.alliedtelesis.com/s

Installation Guide19StandardsProducts in this document meet the following standards:Category Approval Agency and RequirementUL60950-1CAN/CSA-C22.2 No.

Removable Power Supply and Fan20EC Declaration of ConformityWe: ALLIED TELESIS LABS LIMITED27 NAZARETH AVENUECHRISTCHURCH 8024NEW ZEALANDDeclare under

Removable Power Supply and Fan2Removable Power Supply and Fan Installation GuideDocument Number C613-04057-00 REV L© 2008 Allied Telesis, Inc. All rig

Installation Guide3ContentsAbout this Guide ...

Removable Power Supply and Fan4About this GuideThis Installation Guide describes how to install the following PSUs and fans: AT-PWR01 PSU, either AC

Installation Guide5Package ContentsDepending on the model, switches are shipped with a single supply unit (PSU), either AC or DC. Some models also hav

Removable Power Supply and Fan6Installing a Power Supply Unit or FanUse these instructions to install PSUs, chassis fan modules and FOMs. Do not comb

Installation Guide7Installing a PWR01, PWR02, or FAN011. If you are replacing a PSU, disconnect the power cord from the currently installed PSU before

Removable Power Supply and Fan8Installing a PWR05 or FAN031. If you are replacing a PSU, turn off the main power source to the PSU and disconnect the